What a number means before we read anything into it
Every figure on Lookout carries its source, what kind of figure it is, how recent it is and any gaps or doubts. These details are not paperwork: they decide what you can fairly conclude from the number.
The six labels we use
Each figure carries one label. A figure moves to another label only through a stated calculation or model that can be traced back to its inputs.
Published by the named source, such as Bangladesh Bank or the Bureau of Statistics. Where we got it from someone else, we record both.
Worked out by us from official figures with simple arithmetic: growth rates, rates after inflation, gaps, correlations, before-and-after averages.
From a statistical method, by us or by another body (for example the ILO's modelled unemployment). The method and its uncertainty are shown.
A finding from a published study or an institution's assessment, quoted as context. It is never presented as a current Bangladesh figure.
An "if this, then that" path or an outlook from a model. Not a forecast of what will happen, and never mixed with observed figures.
A figure we want but do not yet have from a source we can check and use. We say what is missing instead of filling the gap.
Measures Lookout calculates
Most numbers on Lookout are an official figure, charted. The 72 measures below are Lookout's own: worked out from official figures, estimated, or produced by a model. Each says where it appears, how it is made and what to keep in mind. The "Learn" pop-ups on the panels link here.
Prices & inflation
Inflation persistence Estimatedρ near 1: a rise barely fades, so high inflation tends to stay high.
- Where it appears
- Prices & inflation
- How it is made
- If inflation jumps, persistence asks how much of the jump is still there a month later. High persistence means inflation is 'sticky' and slow to come down on its own; low persistence means a jump fades quickly. Lookout measures it with one number, ρ (rho), estimated from past data. Formula: Inflation this month = constant + ρ × inflation last month + surprise
- How to read it
- ρ near 1: a rise barely fades, so high inflation tends to stay high. ρ near 0: a rise fades at once. Below 0: part of a jump is usually reversed the next month. On the Prices panel the main measure uses monthly price changes; annual rates look stickier because consecutive annual rates share eleven of their twelve months.
- Keep in mind
- Persistence can change over time and with the period measured. A high number says inflation has been slow to fade, not why, and it is not a forecast.
- Sources
- The panel's own data; see its source list.
- Further reading
- IMF: Monetary Policy with Uncertain Inflation Persistence IMF Working Paper 2024/047
- BIS: The inflation process Bank for International Settlements
Entry last revised 2026-11-09
Inflation volatility CalculatedLarger means inflation has been jumping about; smaller means it has been steady.
- Where it appears
- Prices & inflation
- How it is made
- The standard deviation of the last twelve monthly readings of annual inflation. Formula: 12-month volatility = √[Σ(πₜ − π̄)² / 12]
- How to read it
- Larger means inflation has been jumping about; smaller means it has been steady.
- Keep in mind
- Volatility is not persistence: inflation can be steady and still slow to come down. The figure depends on the twelve months chosen.
- Sources
- The panel's own data; see its source list.
- Further reading
- IMF: Inflation and monetary policy research International Monetary Fund
Entry last revised 2026-10-22
Food–non-food inflation gap CalculatedAbove zero means food prices are rising faster than other prices; below zero means non-food prices are rising faster.
- Where it appears
- Prices & inflation
- How it is made
- Both rates are year-on-year, from the same month and the same consumer price index. Formula: Gap = food inflation − non-food inflation
- How to read it
- Above zero means food prices are rising faster than other prices; below zero means non-food prices are rising faster.
- Keep in mind
- The gap shows which prices are rising faster, not why, and not how it affects richer and poorer households.
- Sources
- The panel's own data; see its source list.
- Further reading
- IMF: Consumer Price Index Manual International Monetary Fund
Entry last revised 2026-10-22
Wage–price gap CalculatedAbove zero means wage rates are rising faster than prices; below zero means they are falling behind.
- Where it appears
- Prices & inflation
- How it is made
- Growth in the Bureau's wage rate index minus headline inflation in the same month. Formula: Gap = WRI growth − headline CPI inflation
- How to read it
- Above zero means wage rates are rising faster than prices; below zero means they are falling behind.
- Keep in mind
- The wage rate index covers wage rates of mainly low-skilled workers, not all earnings, so this is a comparison, not a full measure of household income.
- Sources
- The panel's own data; see its source list.
- Further reading
- ILO: Wages and working time statistics International Labour Organization
Entry last revised 2026-10-22
Inflation half-life EstimatedLonger means a rise in inflation fades more slowly.
- Where it appears
- Prices & inflation
- How it is made
- Worked out from the persistence number ρ. Shown only when ρ is between 0 and 1. Formula: Half-life (months) = ln(0.5) ÷ ln(ρ)
- How to read it
- Longer means a rise in inflation fades more slowly.
- Keep in mind
- It depends on the model and the period measured, and it is not a forecast.
- Sources
- The panel's own data; see its source list.
- Further reading
- IMF: Monetary Policy with Uncertain Inflation Persistence International Monetary Fund
Entry last revised 2026-10-22
Three-month price change, at a yearly pace (unadjusted) CalculatedA figure far from the annual rate mainly shows that the last three months differ from the average of the past year.
- Where it appears
- Prices & inflation
- How it is made
- Today's index against its level three months earlier, compounded to a year. Formula: 100 × [(CPIₜ / CPIₜ₋₃)^4 − 1]
- How to read it
- A figure far from the annual rate mainly shows that the last three months differ from the average of the past year. Compare it with the same calculation a year earlier.
- Keep in mind
- Lookout applies no seasonal adjustment to this figure, and compounding magnifies seasonal patterns, so do not read it as the underlying trend. The seasons section of Panel 1 shows the same rate with the normal season taken out.
- Sources
- The panel's own data; see its source list.
- Further reading
- IMF: Consumer Price Index Manual International Monetary Fund
Entry last revised 2026-11-09
Relative-price dispersion CalculatedLarger means some prices are rising much faster than others.
- Where it appears
- Prices & inflation
- How it is made
- The spread (standard deviation and range) of the latest annual inflation rates across CPI groups. Formula: Dispersion = cross-category SD of inflation rates
- How to read it
- Larger means some prices are rising much faster than others.
- Keep in mind
- Not a measure of uncertainty; it depends on how the groups are defined.
- Sources
- The panel's own data; see its source list.
- Further reading
- IMF: Consumer Price Index Manual International Monetary Fund
Entry last revised 2026-10-22
Rolling inflation persistence EstimatedHigher ρ in a window means rises in inflation faded more slowly during those three years.
- Where it appears
- Prices & inflation
- How it is made
- Persistence measured again and again over rolling three-year windows. Formula: Inflation this month = constant + ρ × inflation last month + surprise, over each 36-month window
- How to read it
- Higher ρ in a window means rises in inflation faded more slowly during those three years.
- Keep in mind
- Results depend on the window length, and the chart does not date turning points.
- Sources
- The panel's own data; see its source list.
- Further reading
- IMF: Monetary Policy with Uncertain Inflation Persistence International Monetary Fund
Entry last revised 2026-10-22
Inflation diffusion / breadth CalculatedIf many groups are above a high threshold, price pressure is broad, not limited to a few items.
- Where it appears
- Prices & inflation
- How it is made
- Each month, the share of CPI groups with annual inflation above 5%, 8% and 10%, and the middle group's rate. Formula: Breadth = groups above the threshold ÷ all groups × 100
- How to read it
- If many groups are above a high threshold, price pressure is broad, not limited to a few items.
- Keep in mind
- The thresholds are simple markers, and the result depends on how groups are defined.
- Sources
- The panel's own data; see its source list.
- Further reading
- IMF: Consumer Price Index Manual International Monetary Fund
Entry last revised 2026-10-22
PPI–CPI lead/lag profile EstimatedA peak at a positive shift means producer prices have tended to move first.
- Where it appears
- Prices & inflation
- How it is made
- Correlations between producer and consumer inflation, with one series shifted from six months earlier to six months later. Formula: Correlation of PPI inflation now with CPI inflation k months later, k = −6 … +6
- How to read it
- A peak at a positive shift means producer prices have tended to move first.
- Keep in mind
- Timing is not proof that one passes into the other, and it is not a forecast.
- Sources
- The panel's own data; see its source list.
- Further reading
- BIS statistics and research Bank for International Settlements
Entry last revised 2026-10-22
Food and non-food contributions to headline inflation CalculatedA larger contribution means that group accounts for more of the headline rate.
- Where it appears
- Prices & inflation
- How it is made
- Each group's price change weighted by its share of the basket (food 44.86%, from the Bureau's FY2021-22 weights). Formula: Headline inflation ≈ food contribution + non-food contribution (up to a small rounding difference)
- How to read it
- A larger contribution means that group accounts for more of the headline rate.
- Keep in mind
- This is arithmetic, not a cause: it does not say why food or other prices changed.
- Sources
- The panel's own data; see its source list.
Entry last revised 2026-10-22
Where today's inflation sits in its recent record CalculatedHigher means today's inflation is high compared with recent months.
- Where it appears
- Prices & inflation
- How it is made
- Today's annual inflation ranked against every month available on the current CPI base. Formula: Share = months at or below today's rate ÷ all months × 100
- How to read it
- Higher means today's inflation is high compared with recent months.
- Keep in mind
- This is a short window: the current base has fewer than five years of months, so it mostly reflects the recent path. It is not a forecast or a probability.
- Sources
- The panel's own data; see its source list.
Entry last revised 2026-10-22
Real economy
Growth volatility CalculatedLarger means growth has been less steady.
- Where it appears
- Real economy
- How it is made
- The standard deviation of the last five years' real GDP growth rates: roughly, the typical distance of each year from the five-year average. Formula: 5-year volatility = √[Σ(gₜ − ḡ)² / 5]
- How to read it
- Larger means growth has been less steady. It says nothing about whether growth was high or low on average.
- Keep in mind
- One exceptional year, such as the pandemic, can dominate a five-year window. It describes the past, not future risk.
- Sources
- The panel's own data; see its source list.
- Further reading
- World Bank Data: GDP growth (annual %) World Bank
Entry last revised 2026-10-22
Saving–investment gap CalculatedAbove zero means the country invests more than it saves at home, so the rest comes from abroad (for example remittances, loans or investment).
- Where it appears
- Real economy
- How it is made
- The Bureau's investment line minus gross domestic saving, in the same fiscal year. Formula: Gap = Investment/GDP − Gross domestic saving/GDP
- How to read it
- Above zero means the country invests more than it saves at home, so the rest comes from abroad (for example remittances, loans or investment). Below zero means it saves more than it invests.
- Keep in mind
- An accounting comparison. National saving, which adds income from abroad such as remittances, is a different and usually larger figure.
- Sources
- The panel's own data; see its source list.
- Further reading
- World Bank Data: Gross domestic savings World Bank
- World Bank Data: Gross capital formation World Bank
Entry last revised 2026-10-22
Factory output speed-up CalculatedAbove zero means industrial growth has picked up recently; below zero means it has slowed.
- Where it appears
- Real economy
- How it is made
- Average year-on-year growth of the industrial production index over the latest three months, minus the average over the three months before. Formula: Acceleration proxy = mean(YoY IIP growth, t−2…t) − mean(YoY IIP growth, t−5…t−3)
- How to read it
- Above zero means industrial growth has picked up recently; below zero means it has slowed.
- Keep in mind
- Not adjusted for the seasons, and not an estimate of GDP.
- Sources
- The panel's own data; see its source list.
- Further reading
- UNIDO: Industrial production indices United Nations Industrial Development Organization
Entry last revised 2026-10-22
Investment intensity CalculatedHigher means more of the economy's spending goes to investment.
- Where it appears
- Real economy
- How it is made
- The Bureau's 'Investment (2)' line divided by GDP at current prices. Formula: Investment intensity = Investment (2) ÷ current-price GDP × 100
- How to read it
- Higher means more of the economy's spending goes to investment.
- Keep in mind
- The Bureau's 'Investment (2)' line is shown under its own name, not as gross fixed capital formation. Moving with growth is not proof that it caused growth.
- Sources
- The panel's own data; see its source list.
- Further reading
- UN National Accounts United Nations Statistics Division
Entry last revised 2026-10-22
GDP deflator–CPI divergence CalculatedBelow zero means consumer prices rose faster than the prices of what the economy produces.
- Where it appears
- Real economy
- How it is made
- GDP-deflator inflation is worked out from GDP at current and constant prices; consumer inflation is the fiscal-year average. Formula: Divergence = GDP deflator inflation − annual-average CPI inflation
- How to read it
- Below zero means consumer prices rose faster than the prices of what the economy produces.
- Keep in mind
- The two cover different things (consumers buy imports; GDP includes exports and investment), so some gap is normal and not an error.
- Sources
- The panel's own data; see its source list.
- Further reading
- World Bank: GDP deflator World Bank
- IMF: CPI Manual International Monetary Fund
Entry last revised 2026-10-22
Labour & households
Female–male unemployment gap CalculatedAbove zero means women who want work are more often without it than men.
- Where it appears
- Labour & households
- How it is made
- Both rates from the Labour Force Survey 2024, on the current (19th ICLS) definition. Formula: Gap = female unemployment rate − male unemployment rate
- How to read it
- Above zero means women who want work are more often without it than men.
- Keep in mind
- Many women are outside the labour force altogether and are not counted as unemployed, so the gap does not show the whole picture or explain it.
- Sources
- The panel's own data; see its source list.
- Further reading
- ILOSTAT: Unemployment rate International Labour Organization
Entry last revised 2026-10-22
Urban–rural unemployment gap CalculatedAbove zero means unemployment is higher in towns; below zero means higher in the countryside.
- Where it appears
- Labour & households
- How it is made
- Both rates from the Labour Force Survey 2024, on the current (19th ICLS) definition. Formula: Gap = urban unemployment rate − rural unemployment rate
- How to read it
- Above zero means unemployment is higher in towns; below zero means higher in the countryside.
- Keep in mind
- Town and country jobs differ in type and formality, so the gap alone does not explain the difference.
- Sources
- The panel's own data; see its source list.
- Further reading
- ILOSTAT: Unemployment and labour underutilization International Labour Organization
Entry last revised 2026-10-22
Wage growth after inflation CalculatedAbove zero means wage rates are rising faster than prices, so pay buys more; below zero means it buys less.
- Where it appears
- Labour & households
- How it is made
- Growth in the Bureau's wage rate index, adjusted for consumer inflation in the same month. Formula: Real wage growth = 100 × ((1 + WRI growth/100) / (1 + CPI inflation/100) − 1)
- How to read it
- Above zero means wage rates are rising faster than prices, so pay buys more; below zero means it buys less.
- Keep in mind
- The index covers wage rates, not all earnings or every worker. Read it as a guide to buying power, not a measure of household welfare.
- Sources
- The panel's own data; see its source list.
- Further reading
- ILO: Wage statistics International Labour Organization
Entry last revised 2026-10-22
Employed-person change from Q1 CalculatedBelow zero means fewer people were working than at the start of the year.
- Where it appears
- Labour & households
- How it is made
- The latest quarter's employed total minus the first quarter's, on the current (19th ICLS) definition. Formula: Change = employed persons in current quarter − employed persons in Q1 2024
- How to read it
- Below zero means fewer people were working than at the start of the year.
- Keep in mind
- Not adjusted for the seasons (harvest timing matters), and only within 2024. Read it with the changes in the labour force and in people outside it.
- Sources
- The panel's own data; see its source list.
- Further reading
- ILOSTAT: Employment International Labour Organization
Entry last revised 2026-10-22
Outside-labour-force change from Q1 CalculatedAbove zero means more adults had stopped working or looking for work than at the start of the year.
- Where it appears
- Labour & households
- How it is made
- The latest quarter's total minus the first quarter's, on the current (19th ICLS) definition. Formula: Change = outside labour force in current quarter − outside labour force in Q1 2024
- How to read it
- Above zero means more adults had stopped working or looking for work than at the start of the year.
- Keep in mind
- Not adjusted for the seasons, and it cannot say why people left or joined the labour force.
- Sources
- The panel's own data; see its source list.
- Further reading
- ILOSTAT: Labour force participation International Labour Organization
Entry last revised 2026-10-22
Household income–consumption gap CalculatedAbove zero means the average household reported earning more than it spent.
- Where it appears
- Labour & households
- How it is made
- Both national averages are the Bureau's published figures for the same survey round. Formula: Gap = average household income − average household consumption expenditure
- How to read it
- Above zero means the average household reported earning more than it spent.
- Keep in mind
- This is not a saving rate. Averages hide differences between households, and income is often under-reported in surveys.
- Sources
- The panel's own data; see its source list.
- Further reading
Entry last revised 2026-10-22
Rural–urban poverty gap CalculatedAbove zero means a larger share of rural people are poor.
- Where it appears
- Labour & households
- How it is made
- Both rates from the 2022 household survey (HIES), on the upper poverty line. Formula: Gap = rural poverty rate − urban poverty rate
- How to read it
- Above zero means a larger share of rural people are poor.
- Keep in mind
- It counts how many are poor, not how far below the line they are, and it does not explain the difference.
- Sources
- The panel's own data; see its source list.
- Further reading
- World Bank: Poverty and Inequality Platform World Bank
Entry last revised 2026-10-22
Rural–urban extreme-poverty gap CalculatedAbove zero means extreme poverty is more common in rural areas.
- Where it appears
- Labour & households
- How it is made
- Both rates from HIES 2022, on the lower poverty line. Formula: Gap = rural extreme-poverty rate − urban extreme-poverty rate
- How to read it
- Above zero means extreme poverty is more common in rural areas.
- Keep in mind
- A count of people, not a measure of how deep poverty is.
- Sources
- The panel's own data; see its source list.
- Further reading
- World Bank: Poverty measurement World Bank
Entry last revised 2026-10-22
Urban–rural income Gini gap CalculatedAbove zero means incomes are more unequal in towns than in the countryside.
- Where it appears
- Labour & households
- How it is made
- The Gini runs from 0 (everyone has the same income) to 1 (one household has it all). Both figures are the Bureau's, HIES 2022. Formula: Gap = urban income Gini − rural income Gini
- How to read it
- Above zero means incomes are more unequal in towns than in the countryside.
- Keep in mind
- A single number cannot show where in the distribution the difference lies.
- Sources
- The panel's own data; see its source list.
- Further reading
- World Bank: Gini index World Bank
Entry last revised 2026-10-22
Division poverty range CalculatedLarger means poverty differs more between parts of the country.
- Where it appears
- Labour & households
- How it is made
- Highest minus lowest of the eight divisions' poverty rates, upper poverty line, HIES 2022. Formula: Range = max divisional poverty rate − min divisional poverty rate
- How to read it
- Larger means poverty differs more between parts of the country.
- Keep in mind
- It uses only two divisions and ignores how many people live in each. It is not a ranking.
- Sources
- The panel's own data; see its source list.
- Further reading
- World Bank: Poverty and Inequality Platform World Bank
Entry last revised 2026-10-22
Division extreme-poverty range CalculatedLarger means extreme poverty differs more between parts of the country.
- Where it appears
- Labour & households
- How it is made
- Highest minus lowest of the eight divisions, lower poverty line, HIES 2022. Formula: Range = max divisional extreme-poverty rate − min divisional extreme-poverty rate
- How to read it
- Larger means extreme poverty differs more between parts of the country.
- Keep in mind
- It uses only two divisions and does not explain the difference.
- Sources
- The panel's own data; see its source list.
- Further reading
- World Bank: Measuring poverty World Bank
Entry last revised 2026-10-22
Highest-to-lowest division household-income ratio CalculatedA value of 2 means households in the richest division earn twice as much on average.
- Where it appears
- Labour & households
- How it is made
- Highest divided by lowest of the eight divisions' average monthly household incomes, HIES 2022. Formula: Ratio = highest division average household income ÷ lowest division average household income
- How to read it
- A value of 2 means households in the richest division earn twice as much on average.
- Keep in mind
- Averages, not adjusted for local prices, and they say nothing about inequality within a division.
- Sources
- The panel's own data; see its source list.
- Further reading
- World Bank LSMS World Bank
Entry last revised 2026-10-22
Highest-to-lowest division household-consumption ratio CalculatedLarger means spending differs more between divisions.
- Where it appears
- Labour & households
- How it is made
- Highest divided by lowest of the eight divisions' average monthly spending, HIES 2022. Formula: Ratio = highest division average consumption ÷ lowest division average consumption
- How to read it
- Larger means spending differs more between divisions.
- Keep in mind
- Not adjusted for local prices or household size.
- Sources
- The panel's own data; see its source list.
- Further reading
- World Bank LSMS World Bank
Entry last revised 2026-10-22
Decile 10 / Decile 1 income-share ratio CalculatedA value of 30 means the richest tenth receives thirty times the share of the poorest tenth.
- Where it appears
- Labour & households
- How it is made
- The top tenth's income share divided by the bottom tenth's, HIES 2022. Formula: Ratio = D10 income share ÷ D1 income share
- How to read it
- A value of 30 means the richest tenth receives thirty times the share of the poorest tenth.
- Keep in mind
- A simple contrast, not a full inequality measure like the Gini.
- Sources
- The panel's own data; see its source list.
- Further reading
- World Bank: Poverty and Inequality Platform World Bank
Entry last revised 2026-10-22
Money & credit
Money multiplier CalculatedA higher ratio means broad money is large relative to reserve money.
- Where it appears
- Money & credit
- How it is made
- A ratio of two balances on the same date. It does not mean that one extra taka of reserve money creates a fixed number of taka of broad money. Formula: Money multiplier = M2 ÷ Reserve Money
- How to read it
- A higher ratio means broad money is large relative to reserve money. It rises when people hold less cash or banks keep smaller reserves, and falls when they hold more.
- Keep in mind
- Textbook accounts of a fixed multiplier can mislead. Read this as a description of balance sheets, not as a measure of how money is created.
- Sources
- The panel's own data; see its source list.
- Further reading
- Federal Reserve: Does the Money Multiplier Exist? Federal Reserve Board, FEDS
- Federal Reserve: What is the money supply? Federal Reserve Board
Entry last revised 2026-10-22
Money velocity CalculatedRising velocity means spending in the economy is growing faster than the money stock; falling velocity means money is growing faster than spending.
- Where it appears
- Money & credit
- How it is made
- Nominal GDP for a fiscal year divided by the average of the twelve month-end M2 balances in the same year. Formula: Velocity of M2 = Nominal GDP ÷ average M2
- How to read it
- Rising velocity means spending in the economy is growing faster than the money stock; falling velocity means money is growing faster than spending.
- Keep in mind
- GDP is a flow over a year and money is a balance at a point in time, so the average over the year matters. Changes in how people pay and save can move velocity for years.
- Sources
- The panel's own data; see its source list.
- Further reading
- FRED: Velocity of M2 Money Stock Federal Reserve Bank of St. Louis
Entry last revised 2026-10-22
Private-credit growth after inflation CalculatedBelow zero means lending is growing more slowly than prices, so the same lending buys less than a year earlier.
- Where it appears
- Money & credit
- How it is made
- Private-credit growth from the Monetary Survey, adjusted for consumer inflation in the same month. Formula: 100 × ((1 + private-credit growth/100) ÷ (1 + CPI inflation/100) − 1)
- How to read it
- Below zero means lending is growing more slowly than prices, so the same lending buys less than a year earlier.
- Keep in mind
- It describes the pace; it cannot say whether weak demand for loans or banks' caution is behind it. The consumer price index changed base in 2023, so long comparisons need care.
- Sources
- The panel's own data; see its source list.
Entry last revised 2026-10-22
Government minus private credit growth CalculatedA wide positive gap means new bank credit went more to the government than to firms and households.
- Where it appears
- Money & credit
- How it is made
- Both growth rates come from the same Monetary Survey in the same month. Formula: Net government credit growth − private credit growth
- How to read it
- A wide positive gap means new bank credit went more to the government than to firms and households.
- Keep in mind
- The gap does not show 'crowding out' (government borrowing leaving less for private borrowers). It cannot tell whether one pushed out the other.
- Sources
- The panel's own data; see its source list.
Entry last revised 2026-10-22
Sources of broad-money change CalculatedA large foreign share means money growth came mostly from dollars flowing in; a large domestic share means it came from bank lending at home.
- Where it appears
- Money & credit
- How it is made
- By definition, broad money equals net foreign assets (NFA) plus net domestic assets (NDA). The split shows each one's share of the change. Formula: 100 × change in component ÷ change in M2
- How to read it
- A large foreign share means money growth came mostly from dollars flowing in; a large domestic share means it came from bank lending at home.
- Keep in mind
- Shares can be above 100% or below zero when one part rises and the other falls. It is arithmetic, not a cause.
- Sources
- The panel's own data; see its source list.
Entry last revised 2026-10-22
Private credit depth CalculatedHigher means banks finance a larger part of the economy.
- Where it appears
- Money & credit
- How it is made
- The June balance of private credit divided by that fiscal year's GDP, using one GDP base at a time. Formula: 100 × private credit ÷ GDP
- How to read it
- Higher means banks finance a larger part of the economy. A common yardstick of how deep the financial system is.
- Keep in mind
- Compare only within one GDP base: a change of base alone moves the ratio, without any change in lending.
- Sources
- The panel's own data; see its source list.
Entry last revised 2026-10-22
Broad-money definition gap CalculatedA gap away from zero means the two versions tell different stories about money growth that month.
- Where it appears
- Money & credit
- How it is made
- The headline Monetary Survey (M2) and the IMF-format survey (DCS) cover different institutions, so their growth can differ. Formula: M2 growth − DCS broad-money growth
- How to read it
- A gap away from zero means the two versions tell different stories about money growth that month.
- Keep in mind
- Lookout has not reconciled the two versions; both are shown, and you should say which one you quote.
- Sources
- The panel's own data; see its source list.
Entry last revised 2026-11-09
Interest rates
Selected lending–deposit spread CalculatedA wider spread means borrowers pay more above what depositors earn.
- Where it appears
- Interest rates
- How it is made
- A simple gap between two published rates for the same month. It is not a measure of bank profits. Formula: Spread = commercial-loan lending rate − 3–6 month average deposit rate
- How to read it
- A wider spread means borrowers pay more above what depositors earn. It can reflect funding costs, bad loans, running costs, rules and competition.
- Keep in mind
- These are two particular rates, not the averages across all loans and deposits shown on the main panel.
- Sources
- The panel's own data; see its source list.
- Further reading
- BIS: Monetary policy transmission through banks Bank for International Settlements
Entry last revised 2026-10-22
Treasury-bill term spread CalculatedAbove zero means the government pays more to borrow for a year than for three months; below zero means the opposite.
- Where it appears
- Interest rates
- How it is made
- Both rates from the same month, as published by Bangladesh Bank. Formula: Term spread = 364-day T-bill rate − 91-day T-bill rate
- How to read it
- Above zero means the government pays more to borrow for a year than for three months; below zero means the opposite.
- Keep in mind
- This is the short end of the government's borrowing costs. In Bangladesh it is shaped by bank cash and auctions, so do not read it as a recession signal.
- Sources
- The panel's own data; see its source list.
- Further reading
- Federal Reserve: Treasury yield curve rates Federal Reserve Board
Entry last revised 2026-10-22
Repo-rate volatility CalculatedLarger means the policy rate changed more during the year; zero means it did not change at all.
- Where it appears
- Interest rates
- How it is made
- The standard deviation of the twelve monthly repo-rate readings. Formula: 12-month volatility = √[Σ(rₜ − r̄)² / 12]
- How to read it
- Larger means the policy rate changed more during the year; zero means it did not change at all.
- Keep in mind
- It measures how much the rate moved, not whether policy is tight or loose.
- Sources
- The panel's own data; see its source list.
- Further reading
- BIS: Monetary policy transmission through banks Bank for International Settlements
Entry last revised 2026-10-22
Banking & financial stability
CRAR buffer to minimum CalculatedAbove zero means the system as a whole holds more capital than required; below zero means less.
- Where it appears
- Banking & financial stability
- How it is made
- The capital ratio (CRAR: capital as a share of risk-weighted assets) minus the minimum, for the same date. Formula: CRAR buffer = system CRAR − regulatory minimum
- How to read it
- Above zero means the system as a whole holds more capital than required; below zero means less. It is a distance in points, not an amount of taka needed.
- Keep in mind
- A system average can hide very weak banks next to strong ones. It is not a stress-test result.
- Sources
- The panel's own data; see its source list.
- Further reading
- IMF: Financial Soundness Indicators Guide International Monetary Fund
Entry last revised 2026-10-22
Public finance
Interest burden on revenue CalculatedHigher means more of each taka collected goes to past borrowing and less is left for schools, roads and other spending.
- Where it appears
- Public finance
- How it is made
- Interest paid divided by revenue collected, over the same months of the fiscal year. Formula: Interest burden = interest expenditure ÷ revenue × 100
- How to read it
- Higher means more of each taka collected goes to past borrowing and less is left for schools, roads and other spending.
- Keep in mind
- On its own this does not say whether debt is sustainable. Missing months and one-off receipts can move it.
- Sources
- The panel's own data; see its source list.
- Further reading
- IMF: Government Finance Statistics International Monetary Fund
Entry last revised 2026-10-22
External sector
12-month exchange-rate change CalculatedAbove zero means a dollar costs more taka, so the taka has weakened; below zero means it has strengthened.
- Where it appears
- External sector
- How it is made
- The change in taka per US dollar at month end, against the same month a year earlier. Formula: 12-month change = (BDT/US$ₜ ÷ BDT/US$ₜ₋₁₂ − 1) × 100
- How to read it
- Above zero means a dollar costs more taka, so the taka has weakened; below zero means it has strengthened.
- Keep in mind
- This is against the dollar only, not against all trading partners, and it does not measure how much reaches prices.
- Sources
- The panel's own data; see its source list.
- Further reading
- IMF: Exchange rates and external sector statistics International Monetary Fund
Entry last revised 2026-10-22
Remittance growth CalculatedAbove zero means more money came in than a year ago.
- Where it appears
- External sector
- How it is made
- Bangladesh Bank's monthly remittance figure compared with the same month a year earlier. Formula: YoY growth = (remittancesₜ ÷ remittancesₜ₋₁₂ − 1) × 100
- How to read it
- Above zero means more money came in than a year ago.
- Keep in mind
- Monthly figures jump around festivals and with the gap between official and informal exchange rates.
- Sources
- The panel's own data; see its source list.
- Further reading
- World Bank: Migration and Development Brief World Bank
Entry last revised 2026-10-22
BPM6-to-gross reserve presentation ratio CalculatedThe ratio shows how far apart the two published figures are.
- Where it appears
- External sector
- How it is made
- Bangladesh Bank publishes two reserve figures; the gross one also counts loans to banks and other claims. Both are shown. Formula: Ratio = BPM6 reserve presentation ÷ gross reserve presentation × 100
- How to read it
- The ratio shows how far apart the two published figures are.
- Keep in mind
- It is not a measure of whether reserves are adequate or how much can be used.
- Sources
- The panel's own data; see its source list.
- Further reading
- IMF: International Reserves and Foreign Currency Liquidity Guidelines International Monetary Fund
Entry last revised 2026-10-22
Top-five export-market share CalculatedHigher means exports depend on fewer markets.
- Where it appears
- External sector
- How it is made
- The five largest named markets' share of total export receipts, latest month. Formula: Top-5 share = Σ five largest named destination receipts ÷ World Total × 100
- How to read it
- Higher means exports depend on fewer markets.
- Keep in mind
- Concentration shows exposure, not how hard a shock would hit: that depends on products and contracts.
- Sources
- The panel's own data; see its source list.
- Further reading
- World Bank: Trade data and analysis World Bank
Entry last revised 2026-10-22
Top-five import-source share CalculatedHigher means imports depend on fewer suppliers.
- Where it appears
- External sector
- How it is made
- The five largest named suppliers' share of total import payments, latest month. Formula: Top-5 share = Σ five largest named source-country payments ÷ World Total × 100
- How to read it
- Higher means imports depend on fewer suppliers.
- Keep in mind
- Whether a supplier can be replaced depends on the product, which this figure does not show.
- Sources
- The panel's own data; see its source list.
- Further reading
- World Bank: Trade data and analysis World Bank
Entry last revised 2026-10-22
Exchange-rate volatility CalculatedLarger means the exchange rate has been jumping about more.
- Where it appears
- External sector
- How it is made
- The standard deviation of the last twelve monthly percentage changes in taka per dollar. Formula: 12-month FX volatility = √[Σ(Δeₜ − mean(Δe))² / 12]
- How to read it
- Larger means the exchange rate has been jumping about more.
- Keep in mind
- Volatility is not depreciation: the taka can fall steadily with little volatility. The figure depends on the twelve months chosen.
- Sources
- The panel's own data; see its source list.
- Further reading
- IMF: Exchange rates and external sector statistics International Monetary Fund
Entry last revised 2026-10-22
Across panels
Growth from capital, labour and productivity Model / scenarioCapital and labour show how much growth came from adding inputs; TFP (total factor productivity) is what is left over.
- Where it appears
- Not shown on a page at present
- How it is made
- Uses Penn World Table 11.0 data for Bangladesh: capital stock, and labour as workers × skills × hours. Capital gets a fixed one-third share. Formula: Output growth = ⅓ × capital growth + ⅔ × labour growth + TFP growth
- How to read it
- Capital and labour show how much growth came from adding inputs; TFP (total factor productivity) is what is left over.
- Keep in mind
- A model result, not an official split. TFP is a leftover that also absorbs measurement errors, and a second version using Penn World Table's own labour share is not shown yet.
- Sources
- The panel's own data; see its source list.
- Further reading
- Penn World Table 11.0 Groningen Growth and Development Centre
- BoE growth-accounting example Bank of England
Entry last revised 2026-10-22
Overview and across panels
Direction colour on headline figures CalculatedEach headline figure gets one of four colours: red worse, amber caution, blue neutral or context, green better.
- Where it appears
- Overview, every page (stripe mark)
- How it is made
- Each headline figure gets one of four colours: red worse, amber caution, blue neutral or context, green better. Panels with headline cards set the colour by their own published rule for that card. The Overview sets four tiles itself. Inflation is red when it is more than 0.3 point above a year earlier, green when more than 0.3 point below, and amber in between. Unemployment is red when more than 0.1 point above a year earlier, green when more than 0.1 point below, and blue in between. GDP growth is amber below its usual range and blue otherwise. Private credit is red when it is falling after prices. The stripe mark beside the site name uses the colour of each live panel's headline figure.
- Keep in mind
- The colour marks direction only. It is not a score and does not add the panels up into one reading.
- Sources
- The panels' own headline cards and series.
Entry last revised 2026-10-24
Price rise over the latest three months, against the same months of earlier years CalculatedThe month-on-month changes in the consumer price index for the latest three months are compounded, and set beside the same three months one and two years earlier.
- Where it appears
- Overview
- How it is made
- The month-on-month changes in the consumer price index for the latest three months are compounded, and set beside the same three months one and two years earlier. Comparing the same months keeps the usual seasonal pattern out of the comparison.
- Keep in mind
- Not seasonally adjusted, and three months is short. A slower rise than in the same months of earlier years points to the annual rate easing if it continues; it is not a forecast.
- Sources
- Bureau of Statistics consumer price index, via Bangladesh Bank's national summary data page.
Entry last revised 2026-10-24
Usual range of annual growth CalculatedThe middle half of annual real GDP growth rates since FY2016-17: from the 25th to the 75th percentile.
- Where it appears
- Overview, Real economy
- How it is made
- The middle half of annual real GDP growth rates since FY2016-17: from the 25th to the 75th percentile. A year below the range is weaker than three years in four.
- Keep in mind
- The range moves as years are added. It describes the record, not a target.
- Sources
- Bureau of Statistics national accounts, 2015-16 base.
Entry last revised 2026-10-21
Growth the missing quarter needs CalculatedWhen the annual estimate is out before the last quarter, the published quarters and the annual total fix the last quarter by arithmetic: the annual level minus the three published quarters, compared with the same quarter a year earlier.
- Where it appears
- Overview, Real economy
- How it is made
- When the annual estimate is out before the last quarter, the published quarters and the annual total fix the last quarter by arithmetic: the annual level minus the three published quarters, compared with the same quarter a year earlier.
- Keep in mind
- An accounting identity, not a forecast. A very high figure means either a strong quarter or a revision to the provisional annual estimate.
- Sources
- Bureau of Statistics quarterly and annual national accounts.
Entry last revised 2026-10-21
Signal against noise CalculatedA change is compared with how much such figures usually move for reasons other than the economy: for annual growth, the later revisions to first-published growth figures from 1995 to 2024; for monthly series, the usual swing.
- Where it appears
- Real economy
- How it is made
- A change is compared with how much such figures usually move for reasons other than the economy: for annual growth, the later revisions to first-published growth figures from 1995 to 2024; for monthly series, the usual swing. The verdict is one of three: within normal noise, larger than most but not yet certain, or clearly larger than usual.
- Keep in mind
- A change inside the noise can still be real; the check says only that the record cannot yet tell it apart.
- Sources
- Real-time growth vintages and the panels' own series (Lookout’s noise check).
Entry last revised 2026-10-21
Gap from the pre-COVID path CalculatedA straight line is fitted through the logarithm of each series over the years before 2020 and carried forward.
- Where it appears
- Overview
- How it is made
- A straight line is fitted through the logarithm of each series over the years before 2020 and carried forward. The years are FY2010-11 to FY2018-19 for yearly series, the first available month to December 2019 for twelve-month totals, and June 2012 to June 2019 for real wages. Real wages are the June wage rate index each year after June-to-June consumer price inflation, the same inflation used for private credit. The gap is the latest level against that line.
- Keep in mind
- A yardstick for how far things have moved, not what should have happened. Short fitting windows (exports, remittances) make the path less certain. The wage index changed weights and formula in July 2023, and it covers wage rates of lower-paid workers, not earnings.
- Sources
- Real GDP: World Bank WDI growth, equal to the Bureau of Statistics series from FY2016-17. Private credit after prices: the Money & credit panel. Exports and remittances: Bangladesh Bank. Real wages: the Bureau of Statistics wage rate index. To June 2023 it is the 2010-11-base series re-referenced to 2021-22, from Annex-I of the July 2023 rebasing report. After that it is the current index, from Bangladesh Bank.
Entry last revised 2026-10-25
Expected release dates EstimatedThe end of the next period plus each source's usual lag (Lookout’s release calendar), for example ten days for consumer prices and three for remittances.
- Where it appears
- Overview, Policy and releases watch
- How it is made
- The end of the next period plus each source's usual lag (Lookout’s release calendar), for example ten days for consumer prices and three for remittances. A release is listed as not yet in our copy when its expected date has passed by more than three days.
- Keep in mind
- Our estimate, not a published calendar. 'Not in our copy yet' can mean the publisher is late or that Lookout's copy is behind.
- Sources
- Usual lags recorded in Lookout’s series catalogue; Bangladesh Bank's statement on quarterly policy statements.
Entry last revised 2026-10-24
Lookout's yearly growth outlook Model / scenarioSeveral forecasting methods were tested on past forecast dates using only the data available at each date; the one with the smallest past errors is used.
- Where it appears
- Overview, Real economy
- How it is made
- Several forecasting methods were tested on past forecast dates using only the data available at each date; the one with the smallest past errors is used. The 80% range is set from how wrong the method has actually been.
- Keep in mind
- A model estimate, not an official forecast. The range is wide because growth in Bangladesh has been hard to forecast.
- Sources
- Annual real GDP growth (World Bank WDI and the Bureau of Statistics provisional estimate).
Entry last revised 2026-10-20
Lookout's short-run inflation outlook Model / scenarioFifteen forecasting methods, from simple rules to seasonal ARIMA and a small neural network, were tested on about 100 past forecast dates.
- Where it appears
- Prices & inflation
- How it is made
- Fifteen forecasting methods, from simple rules to seasonal ARIMA and a small neural network, were tested on about 100 past forecast dates. The one with the smallest past errors is used, and the range shows how wrong it has actually been.
- Keep in mind
- A model estimate, not an official forecast. Public forecasts are published by Forecast Lab.
- Sources
- Bureau of Statistics consumer price index.
Entry last revised 2026-10-20
Reserves against the IMF adequacy test CalculatedReserves on the IMF basis divided by the IMF's composite benchmark, which weights exports, broad money, short-term debt and other liabilities.
- Where it appears
- Overview, External sector
- How it is made
- Reserves on the IMF basis divided by the IMF's composite benchmark, which weights exports, broad money, short-term debt and other liabilities. The managed-rate and floating-rate weights give two lines.
- Keep in mind
- The IMF suggests 100 to 150% of the benchmark; the weights are the IMF's, the inputs Bangladesh Bank's.
- Sources
- Bangladesh Bank reserves and balance-of-payments data; IMF, Assessing Reserve Adequacy (2014).
Entry last revised 2026-10-22
What forecasters expect ResearchEach institution's figure for the coming fiscal year is copied as published, with the edition it comes from and how it changed since the institution's previous edition.
- Where it appears
- Overview
- How it is made
- Each institution's figure for the coming fiscal year is copied as published, with the edition it comes from and how it changed since the institution's previous edition. Two model rows (Lookout's yearly outlook and Forecast Lab) are marked as models.
- Keep in mind
- These are other people's estimates, not a separate count. Fiscal years run July to June and are labelled differently by each institution.
- Sources
- Lookout’s register of published forecasts and institutional assessments, each figure read in the publisher's own document.
Entry last revised 2026-10-24
Rules every panel follows
Charts and summaries may simplify what the sources say. They may not quietly correct or reinterpret it.
- We record who publishes a figure and, separately, where we downloaded it.
- Missing figures stay missing. Any estimate that fills a gap is labelled as one, with its method.
- If a source's figure looks wrong, we keep it and flag it. We never quietly replace it.
- Our calculations describe what moved together. We do not say one thing caused another unless a study designed to test that supports it.
- Every update is checked before its data are added to our records.
- The website is built from those records; it is not itself a source.
Latest reading, what it is compared with, and the longer view
Every panel follows the same order. No panel pretends a slow source is more up to date than it is.
The newest checked figure. For a ratio or a split that needs several inputs, the newest month that all of them share.
The previous month, quarter or fiscal year on the same basis, or the same months of the previous year. Part years and full years are never mixed.
The typical level, trend or swing over many years, a survey's structure, or a research benchmark, used to judge whether today's reading is unusual.
The latest edition we hold of each source
The same edition downloaded twice is recorded once, matched by panel, source and file fingerprint (SHA-256).
| Panel | Source | Latest period | Status | Recorded (UTC) |
|---|---|---|---|---|
| cpi | BD_BB_NSDP_CPI | 2026-08 | QA_PASSED_BY_WORKFLOW | 2026-09-09 18:39:18 UTC |
| cpi | IMF_CPI | 2026-08 | QA_PASSED_BY_WORKFLOW | 2026-09-10 09:23:24 UTC |
| dcs-cbs | BD_BB_NSDP_CBS | 2026-06 | SOURCE_CHECKED | 2026-09-10 03:28:23 UTC |
| dcs-cbs | BD_BB_NSDP_DCS | 2026-06 | SOURCE_CHECKED | 2026-09-10 03:28:23 UTC |
| interest-rate-intelligence | BD_BB_NSDP_INTEREST | 2026-07 | INTERNAL_UNTIL_LICENSE_REVIEW | 2026-09-10 03:28:23 UTC |
| interest-rates | BD_BB_INTEREST_RATE_HTML | 2026-07 | QA_PASSED_BY_WORKFLOW | 2026-09-09 18:39:18 UTC |
| ppi | BD_BB_NSDP_PPI | 2026-06 | QA_PASSED_BY_WORKFLOW | 2026-09-10 06:28:45 UTC |
| production-index | BD_BB_NSDP_PROD_INDEX | 2026-04 | BLOCKED_PENDING_DEFINITION_BINDING | 2026-09-10 03:28:23 UTC |
| traditional-money-credit | BD_BB_MET_MONETARY | 2026-06 | SOURCE_CHECKED | 2026-09-09 17:59:19 UTC |
| wri | BD_BB_NSDP_WRI | 2026-08 | QA_PASSED_BY_WORKFLOW | 2026-09-10 03:28:23 UTC |